What comes inside a standard porta potty?
A standard porta potty has a toilet seat over a 60-gallon holding tank, plus a urinal. It also has a toilet paper holder, a hand sanitizer dispenser, a vent and a mirror. The translucent roof lets daylight in. Event units arrive fully stocked, and job-site units are restocked at every weekly service.
- Toilet seat and holding tank: the 60-gallon tank sits below the seat. Nothing hooks up to a sewer or water line.
- Urinal: a non-splash urinal on the side wall takes pressure off the seat on busy sites.
- Paper and sanitizer: the holder takes 2 to 3 rolls. A sanitizer dispenser hangs by the door.
- Vent and roof: a vent stack pulls odor up and out. The light-colored roof means no flashlight during the day.
- Door latch: the latch shows Occupied or Vacant from outside.
Event units come from a separate, newer set used only for parties, weddings and community events. Construction units stay on job sites. That keeps the unit at your backyard party looking clean and fresh.
A standard unit has no sink. For food or kids, add a portable hand-wash station next to it. If you want water inside the stall, look at the deluxe flushing unit with a sink.
How big is a standard porta potty? Tech specs
A standard porta potty stands about 91 inches tall, 43.5 inches wide and 47 inches deep. The empty unit weighs about 165 pounds and holds 60 gallons of waste. These are manufacturer specs for the PolyJohn PJN3 reference model, and your unit may differ by an inch or two.
| Spec | Standard unit (reference model: PolyJohn PJN3) |
|---|---|
| Height | 91 in (231 cm) |
| Width | 43.5 in (110 cm) |
| Depth | 47 in (119 cm) |
| Weight, empty | 165 lb |
| Holding tank | 60 gal |
| Inside | Toilet, non-splash urinal, 2–3 roll paper holder, sanitizer, mirror |
| Roof | Translucent, lets in daylight |
| Hookups | None: no water, sewer or power |
Source: PolyJohn PJN3 product page. Other brands in the same class run within a few inches of these numbers.
Height matters too. At 91 inches, the unit clears most porches and carports, but watch for low branches, gutters and wires over the spot.
Will a standard porta potty fit through my gate?
A standard porta potty is about 43.5 inches wide, so a gate about 48 inches wide or wider works. Measure the narrowest point on the path, including posts and latches. If the opening is under 48 inches, the driveway or the side of the house is usually the better spot.
Width is only one part of the path. Check these before delivery day:
- Firm ground: grass, gravel or pavement all work. Skip soft mulch beds and fresh sod.
- No stairs: steps and steep slopes make moving the unit unsafe.
- Level spot: it does not have to be perfect, but a tilt makes the door swing and the tank slosh.
- Off the septic: keep the unit off septic covers and tank lids.
- Truck access: the truck needs to park reasonably close to the spot.
Mark the spot with cones, tape or a flag. The driver calls ahead before arriving, and you do not need to be home if the spot is marked and reachable. Our guide on where to place a porta potty has more layout tips.
Need it delivered today?
Call before noon, Monday to Saturday, for same-day delivery.
Is standard porta potty rental in CT right for your job or event?
Standard porta potty rental in CT fits most job sites, backyard parties, sports fields and home projects. One unit serves about 50 guests at a 4-hour party, or about 10 workers on a 40-hour week with weekly service. Choose another unit when guests use wheelchairs or expect a sink.
Best for
- Construction crews on a job site porta john rental with weekly service
- Graduation parties, cookouts and reunions through event porta potty rental
- Painters, roofers and remodel crews at a house
- Ballfields, trailheads and storage lots on a monthly cycle
Not right for
- Guests using a wheelchair or walker: book a wheelchair-accessible porta potty instead, with ground-level entry.
- Formal weddings: guests in dresses and suits often expect a flush and a sink. A restroom trailer or deluxe unit fits better.
- Food events with no other sink: pair standard units with hand-wash stations.
Need a count? The guide on how many porta potties you need walks through guests, hours and alcohol.
How does a standard porta potty compare with other units?
A standard porta potty is the smallest and simplest unit, with no flush, no sink and no hookups. A deluxe unit adds a flush and sink, an accessible unit adds floor space and a level entry, and a restroom trailer adds running water. The table below compares all 4 side by side.
| Standard unit | Deluxe flushing unit | Wheelchair-accessible unit | Restroom trailer | |
|---|---|---|---|---|
| Best use | Job sites, backyard parties, short events | Showers, receptions, office staff | Guests using wheelchairs, walkers or strollers | Weddings, formal parties, VIP areas |
| Flushing | No, waste drops into a 60-gal holding tank | Foot-pump fresh-water flush | No, holding tank | Flushing toilets |
| Handwashing | Hand sanitizer inside; add a hand-wash station | Foot-pump sink with soap and towels inside | Hand sanitizer inside; station sits outside | Sinks with running water |
| Accessibility | Step-up entry, standard door | Step-up entry, standard door | Ground-level entry, 32 in door opening, handrails | Entry steps; pair with an accessible unit |
| Water / power | None | None | None | 110V outlet plus garden hose or onboard tank |
| Space needed | About 43.5 x 47 in; 48 in gate | About 47 x 48 in; 52 in gate | About 62 x 62 in; driveway or double gate | Level spot the tow vehicle can reach |
| Main limitation | No sink and no flush | Flush and sink water need refills on busy days | Needs a wide, level spot and a firm path | Needs power, water and truck access |
Many orders mix units. A common backyard setup is 2 standard units plus 1 hand-wash station. A larger party might add 1 wheelchair-accessible unit at the end of the row.